I am very excited to kick off Hip for the Holidays, a little celebration of holiday apparel here at Leafy Tree Top Spot. I love the idea of having something special to sport as you celebrate the holidays. Everyone can find a little something special for the season. It seems to be the one time of year that just about anyone can get away with sparkles and sequins.
I thought that I'd start out the celebration with a couple of embellished onesies for the littlest ones in our lives. I have sisters and close friends that are going to be delivering some super sweet packages this year, and why not welcome them to the world with some super sweet onesies.
The Sequined Snowflake Onesie
I'll start out with the simpler of the two featured onesies. The top is made by cutting out a snowflake shaped piece of fabric to be appliqued to the top. I used white rainbow felt for this project, but any scrap fabric should work. I normally wouldn't applique with felt, but I figure that baby clothes don't typically get much wear, especially when they are seasonal.
I found a simple snowflake shape in Photoshop elements (but any free clip art would work). I then sized it to fit the onesie, and used it as a template to cut out my fabric shape. I used heat and bond fusible adhesive to attach the center of the snowflake to the onesie. Next I machine stitched the branches of the snowflake so that they were tacked down in place. You could stop there if you were making a onesie for the little man in your life, but I wanted to really dress it up. I picked up a small package of iridescent sequins at Joann's, they were less than one dollar. I then sewed them in place with transparent thread.
If you've never sewn on sequins don't be intimidated. It takes a bit of time, but is quite simple. I followed the instructions from this video.
Christmas Tree Top
This particular top is going to make it's way to my nephew. I love how it turned out. It could easily be dressed up with sequins or beads, but I like it clean and simple.
To make this top you will need ribbon, a scrap piece of fabric, heat and bond, and a sewing machine. I wanted to work with multiple shades of green so I used two similar colors, and had a bit of brown ribbon on hand as well. The ribbon that I used was 1 1/2" wide.
I cut 6 strips of ribbon (three of each shade) that were six inches long each. I then applied a strip of heat and bond to the back of each ribbon. (I did not extend my heat and bond to the edges, but you certainly could).
Next I adhered the strips of ribbon to my scrap piece of fabric, starting at the bottom and offsetting the strips, and alternating shades, as I went up.
Next adhere a piece of heat and bond to the back side of your scrap piece of fabric. Once you have set your heat and bond you can sketch out, or transfer your image, onto the paper backing of the heat and bond.
You will also want to cut a small piece of brown ribbon for the trunk of your tree. My trunk is the width of the ribbon and about one inch long. I rounded the edge of the bottom of the trunk. Adhere heat and bond to the back of the trunk piece.
Cut out your tree. Apply fray check or fray block to the edges of your shapes to prevent fraying.
Remove the paper backing from the tree trunk and set it in place with your iron. Stitch the tree trunk in place. Next position and adhere your pine tree in place. Stitch around the perimeter of your pine tree. If you have used fray check on your ribbon shapes you shouldn't have to worry about much fraying. If you didn't use fray check I would suggest using a satin stitch (close zig zag stitch) to encase any raw edges and prevent fraying.
That's it. Your festive and simple holiday onesies are complete. Your littlest ones are now ready to sport their seasonal fashions.
Have your own ideas of holiday wear? Link up your holiday apparel projects at the Hip for the Holidays link party.
I'll be linking here.