Search This Blog

Showing posts with label serger tutorials. Show all posts
Showing posts with label serger tutorials. Show all posts

Saturday, May 10, 2014

Quick and Easy Spaghetti Straps


When it comes to sewing, one of my least favorite aspects is turning tubes.  Small, tight tubes can be especially tedious and frustrating.  Today I have a quick trick for you that can help make the process go much faster.

It is especially helpful if you have multiple tubes to turn, like in this sailor's knot headband I made for my niece.

First off, it is a technique that uses an overcast serger.  So, if you don't have one, it is just one more reason to add a serger to your wish list.


You'll need a serger, and a large eyed needle.  That's it.


To sew your tube, you'll serge over the raw edges, with your right sides of your fabric facing each other.   You want to make sure that you leave a long chain on the end of your strap. I'd recommend a chain that is at least six inches.

I used a basic three thread overcast stitch.  A four thread would work as well.


Once you've overcast your edges, thread your chain into the eye of your needle.


 Insert the needle into the tube (same end as the threaded chain). Feed the needle/chain through the entire length of the strap.


As you gently feed the needle/chain through, the tube will turn right side out.  Easy as that.


 In no time you can sew up several straps for your summer sundresses.

Tuesday, August 28, 2012

Technique Tuesday: Basic Three-Thread Flatlock Stitching


Flatlock stitching is a technique that I've wanted to figure out on my serger for awhile now.  A flatlock seam can be decorative when serged on the fold of a fabric, or used to join two fabrics together, while creating a finished flat seam.  


The set up of the machine is pretty simple.  It is a three thread stitch, with the needle in either the left or right position. The multi-purpose guide foot is used, and can be extremely helpful when stitching along a folded fabric.  

Tension Settings: (Brother 1034 D)
Left Needle: 1.0 (wide stitch)
Right Needle: 1.0 (narrow stitch)
Upper Looper: 4.5
Lower Looper: 7.0-8.0 

 See your serger handbook for settings for other makes and models.


Differential: 0 (far left)
Stitch Length: 3.0-4.0


 Knife: 3.0-4.0


 Multi-purpose guide foot attached.  The white plastic piece on the right of the foot is the guide.  The metal wheel on the left adjusts the position of the guide.


If you are flatlock stitching on the fold of a garment, you will press the fold.  Then align the fold of the fabric with the guide foot.


  I found that my stitches were the best if the guide sat in the middle of the stitching. 


Because the stitching is unbalanced, when the fabric is pulled open, the stitching pulls flat on the surface of the fabric.  

Bunchy fabric.

Initially, I had my guide foot wider, and my fabric always bunched up between the stitching when pulled open, when I moved the guide closer to the left needle, the fabric laid nicer.


The wrong side of the flatlock stitch is decorative in and of itself.  It creates ladder pattern, very similar to the blind hem stitch. Either side of the stitching can be shown on the garment.


Flatlock stitching can be done to join two pieces of fabric.


 When flatlocking two pieces together, the wrong sides of the material should be facing each other.  The right sides should face outward (unless you want the ladder stitching to be on the right side of the fabric). When joining two pieces together with a flatlock stitch, it is not necessary to use the guide.  Trimming the material with the knife will ensure an even and clean edge.



 Serge just as you would if the material were on the fold.  When the seam is pulled open, the top piece of material will fold over toward the edge of the flatlocked stitch.

I've yet to try the technique out on an actual project, but can't wait to do so.

 Have you used this technique on any projects?  If so, what were they?  

I've seen the stitching on swimsuits, raglan t-shirts, and kids clothing.  I love the look of it.

 Just a little reminder that you can receive 10% off your orders from the P&G eStore this month, with free shipping on orders over $25.  There are several olympic deals going on still, so be sure to stop by and snatch your favorite products from the comfort of your home office.